STANDING SHIELDED PRESSES FOR HEARTWOOD CURVING OR MULTILAYER CURVED GLUING

EIVS Mod. 1600 - 2000 - 2500 EIVL 2400

Standing presses and lamina presses belong to two different types of press and do not have the same applications. In fact, standing presses are recommended for the slight curving of heartwood or for curved gluing in multi-layers, while lamina presses are recommended for sharp curves of duly vaporised heartwood (for which we can supply the complete system of steam generator and vaporisation tunnel).
Standing presses impart the thrust upwards and have both an upper and lower die-holder. Usually, high frequency generators of our production are used in glue polymerisation or heartwood stabilisation (the alternative is the traditional cold system). Standard dimensions are the following:

1600 mm. x 8OO mm.	Mod. EIYS 1600/800
1600 mm. x 1000 mm.	Mod. EIYS 1600/1000
2000 mm. x 1000 mm.	Mod. EIYS 2000/1000
2500 mm. X 1000 mm.	Mod. EIYS 2500/1000

further divided according to the maximum thrust weight required:
40.000Kg., 70.000 Kg. ,100.000 Kg. and 150.000Kg.
The cylinder standard stroke is 650mm. while the press opening is 800mm.; further configurations are available on request.
The standing lamina presses use a single lower die since the upper counterdie is replaced by a stainless steel lamina which adapts to the mould pattern, by means of draft and back-thrust cylinders. The press is also equipped with a special locking system that locks the boards to be bent, and it is designed to be connected to our high frequency generators for a quick stabilisation of the operation. It can easily perform 180? curves.
The press standard dimensions, referred to the curving usable surface are: 600 mm. x 2400 mm. with maximum thickness of 50 mm. Model EIVL 2400
Other configurations are available on request.

[PRODUCT LIST]